Manufactured by qualified electronics engineers on an ISO-9002 SMD assembly line, for military-grade testing and quality control. Absolutely guaranteed to produce the results specified by Dr Clark.

Microcircuits allow to obtain  this small and ergonomic packaging possible. Built with great care and engineering time, no detail has been overlooked. It is a quality version  of Dr. Clark’s Zapper, mass-produced by real engineers, so that anyone who wants to experience one, can do so with confidence.

Characteristics of the zapper

• Three frequencies available : 30 kHz, 2.5 kHz and 15 Hz
• Positive compensation of 0.25v, STABILISED WAVE TECHNOLOGY
  Low battery light (a FIRST on a 3-frequency zapper!!). Our low battery light is powered by a precision voltage control IC, not by “generic parts”.
• Easy-access battery compartment with snap-in replacement. The battery holder is locked, so it is impossible to misplace the battery, with the added protection of a reverse polarity diode to prevent battery inversion.
  Included 6 inches copper handles with high gloss finish and finely bevelled edges (NO sharp edges here!!)
  EXTRA-FLEXIBLE RODs with easy-to-use banana plugs and alligator clips to attach the zapper to the copper handles.
• Lifetime warranty included – have peace of mind with the quality of your zapper.
• The components used are much more tolerant (1% resistors, 2% capacitors) than competing units, resulting in a much more accurate output.

To know

It is a green product, lead-free and manufactured with a concern for the preservation of our environment!

The device works with a standard 9-volt battery. Please note that the device does not come with a battery.

L’article Deluxe Zapper est apparu en premier sur Zapper Hulda Clark.

Manufactured by true electronic engineers on an ISO-9002 SMD assembly line for military grade testing and quality control. Absolutely guaranteed to produce the EXACT performance specified by Dr. Clark. No guesses as to whether it was done right!

This small, ergonomic, custom molded case is made possible by its microcircuitry. Built with the utmost care and a lot of engineering time, no detail has been overlooked. This is a superb execution of Dr. Clark’s Zapper, mass-produced by real engineers so that anyone who wants to experiment with a Zapper can do so with great confidence.

It’s a green, lead-free, environmentally friendly product !

Features :

• Positive offset of 30 KHz (according to the latest specifications, 0.25v) square wave with 50% duty cycle.
• Reverse voltage protection
• Flexible and wired cords with alligator clips that are easy to attach and grip for connection to hoses.
• Includes copper pipes from 6″ with a glossy finish and finely bevelled edges (NO sharp edges here!!)
• Easy access battery compartment (no tools required to replace batteries)
• High quality poly-carbonate personalized label

Lifetime Warranty
Much better construction than competing units
More accurate output due to more precise components
Same day shipping from materials in STOCK
All this at a lower price

Please note that the device does not come with a battery. The unit operates with a standard 9-volt battery.

L’article The Classic Zapper est apparu en premier sur Zapper Hulda Clark.

This nano Clark zapper kills all kinds of parasites such as bacteria, viruses, fungi and moulds. This bio-resonance device is used for the general elimination of pathogens and is based on the original diagram of Dr. Hulda Clark.

Please use the device according to the Clark protocol ;  this information is widely available on our website.

Please note that this device does not cure anything, it is not a medical device. The zapper is only used to remove pathogens. This device is intended for scientific, cognitive and recreational applications and can be used to remove pathogens from soil, water, animals, plants, etc…

The nano zapper is guaranteed for 1 year.

The used Clark zapper set includes :

– A nano ZAPPER

– Cable length approx. 50 cm, with crocodile clip and 3.5 mm plug for connecting the copper electrodes to the ZAPPER device

– Six conductive gel electrodes included for hands-free zapping.

Characteristics :

• 100% positive offset
• Frequency output 30kHz (+ -1%)
• Square wave with 50% duty cycle (+ -2%)
• Input voltage 9V DC (battery only)
• Output voltage 3-4.5V DC
• Current 5-10 mA
• Reverse polarity protection
• Waterproof

Precision assembly on highly resistant printed circuit boards, such as critical military and medical equipment.

This used zapper from Dr. Clark’s is  small and ergonomic  thanks to its microcircuits. Built with the utmost care and a lot of engineering time, no detail has been overlooked. This is a superb execution of Dr. Clark’s Zapper, mass-produced by real engineers at a very low price so that anyone who wants to experiment with a Zapper can do so with great confidence.

This is a green, lead-free, environmentally friendly product !

L’article Nano Zapper Clark est apparu en premier sur Zapper Hulda Clark.

Available functions : Beeper, Constant current indicator, Battery indicator, simple and direct choice of six frequencies (15Hz, 7.83Hz, 1kHz, 2.5kHz, 10kHz, 30kHz).

Description of the maestro zapper

ABS case with snap-on battery cover.

Electrodes made of pure copper (99.5%), length (22 mm diameter, 11 cm).
long), for a comfortable grip.

2-layer printed circuit board, industrial quality, with solder mask.
Microcontroller drive. SMD, CMOS circuit.

Uses exclusively 9V battery (SHD, alkaline, rechargeable). Maximum input voltage: 11V. Protection against battery inversion.

Battery indication voltage at the beginning of a session.
4 to 2 beeps, battery OK. 1 beep, to be replaced quickly
Estimated autonomy of : 50+ sessions 7-20

Choice of sequences

7-20 sequences with 30kHz
7mn_30kHz, 20mn Pause, 7mn_30kHz, 20mn Pause, 7mn_30kHz

7-20 or 28-20, with 2.5kHz
28mn_2.5kHz, Pause, 28mn 2.5kHz, Break, 28mn 2.5kHz, Sleep

Deep Sleep Sequence this sequence starts at 10.5Hz and goes down to 1.0Hz in 1 hour. 10mn. The first part goes from 10.5Hz to 7.83Hz for relaxing stress relief. 2nd part goes from 4.0Hz to 1.0Hz, putting your brain in a relaxed mood, conducive to deep sleep.

Choice of current

The output current setting is made on the top right of the front panel.
Selection of 4 regulated current values: 1.5mA, 3mA, 5mA, 7mA.

L’article Zapper maestro Mz3c by Dr. Hulda Clark est apparu en premier sur Zapper Hulda Clark.

The different programs of the zapper :

SA1 : Dr Clark’s recommended frequency, seven minutes at 30kHz, followed by a 20-minute break, repeated three times. Automatic stop at the end of the session.

SA2 : A zapper using a sweep using 64 different frequencies, between 2426Hz and 2426Hz.
The Maestro-Zapper designed an automatic session copied from the original 30KHz sequence. 4 times more zapping (28min instead of 7min), and for only twice as much time (2h) Ideal when 7-20 is not enough.

SA3 : Based on our past experience, we are happy to add “for free”, on this version, a very special sequence, using the whispering of Very Low Frequencies (VLF) to the brain, to help you fall asleep more easily.

Cxx : continuous zapping for 3 hours, allowing a simple and fast zapping, and a wide range of experiences, with 6 frequencies easily selectable and/or modifiable, on the fly, at your fingertips. These frequencies include :

• CA1: The classic 30 kHz, Dr. Clark’s favourite frequency.
• CA2: Frequencies between 8kHz and 16kHz (one octave), leaving 255 different frequencies. We don’t target one particular parasite: We want them all!
• CA3: The classic 2.5kHz, leaving 64 different frequencies. The 2.5kHz at its best!
• Automatic shutdown at the end of the session (1h). The Maestro-Zapper has designed an automatic session copied from the original 30KHz sequence. 4 times more zapping (28min instead of 7min), for only twice as much time Ideal when the 7-20 zapping session is not enough.

Available functions :

• Beeper
• Constant output current indicator (output well connected)
• Battery voltage indicator, at the beginning of the session
• Simple and direct selection of six frequencies
• Choice of three sequences (7-20 min; 28-20 min; Non stop 3h)
• SELECTION OF 4 OUTPUT CURRENTS: 1.5 mA == 3.0 mA == 5.0 mA == 7.0 mA

This zapper can be used for :

• general and continuous zapping (3 hours maxi
• Frequency effect zapping (2.5kHz, 1kHz, 15Hz, 7.83 Hz)
• Zapping on plate (8.9V minimum and 30kHz)
• Homeography (9V minimum and 30kHz)
• Zapper (1.0kHz)

Important : External accessories for plate zapping, homeography or zapper are not provided.

L’article Maestro zapper mz6 est apparu en premier sur Zapper Hulda Clark.