Highest quality, strongest Zappicator – Get the best for an affordable price.

How the Zappicator is made

Manufactured by real graduate electronics engineers on an ISO-9002 SMD assembly line for military-grade testing and quality control. It is guaranteed to produce the EXACT result specified by Dr Clark.

Microcircuits make this small custom and ergonomic zapper possible. Built with great care and a lot of engineering time, no detail has been overlooked. This is an excellent execution of Dr. Clark’s zapper, mass-produced by real engineers at a very low price, so that anyone can experience it with great confidence.

Features of the zappicator

• Positive offset square wave of 1 kHz with a perfect duty cycle of 50%.
• Precision assembly on rugged printed circuit boards, as well as essential military and medical equipment
• Reverse polarity protection
• Global design, requires nothing more than a battery
• Smallest and tightest tolerance components
• Constructed with 11 high-resistance magnets with the correct North Pole configuration (North Poles are facing away from the rubber feet)
  Easily accessible battery compartment (no tools required to replace the battery)

It is an environmentally friendly product, lead-free and manufactured with a concern for the preservation of our environment!

The device works with a standard 9-volt battery. Please note that the device is delivered without battery.

The zappers of Dr Hulda Clark

L’article Dr. Clark’s Zappicator est apparu en premier sur Zapper Hulda Clark.

Available functions : Beeper, Constant current indicator, Battery indicator, simple and direct choice of six frequencies (15Hz, 7.83Hz, 1kHz, 2.5kHz, 10kHz, 30kHz).

Description of the maestro zapper

ABS case with snap-on battery cover.

Electrodes made of pure copper (99.5%), length (22 mm diameter, 11 cm).
long), for a comfortable grip.

2-layer printed circuit board, industrial quality, with solder mask.
Microcontroller drive. SMD, CMOS circuit.

Uses exclusively 9V battery (SHD, alkaline, rechargeable). Maximum input voltage: 11V. Protection against battery inversion.

Battery indication voltage at the beginning of a session.
4 to 2 beeps, battery OK. 1 beep, to be replaced quickly
Estimated autonomy of : 50+ sessions 7-20

Choice of sequences

7-20 sequences with 30kHz
7mn_30kHz, 20mn Pause, 7mn_30kHz, 20mn Pause, 7mn_30kHz

7-20 or 28-20, with 2.5kHz
28mn_2.5kHz, Pause, 28mn 2.5kHz, Break, 28mn 2.5kHz, Sleep

Deep Sleep Sequence this sequence starts at 10.5Hz and goes down to 1.0Hz in 1 hour. 10mn. The first part goes from 10.5Hz to 7.83Hz for relaxing stress relief. 2nd part goes from 4.0Hz to 1.0Hz, putting your brain in a relaxed mood, conducive to deep sleep.

Choice of current

The output current setting is made on the top right of the front panel.
Selection of 4 regulated current values: 1.5mA, 3mA, 5mA, 7mA.

L’article Zapper maestro Mz3c by Dr. Hulda Clark est apparu en premier sur Zapper Hulda Clark.

The different programs of the zapper :

SA1 : Dr Clark’s recommended frequency, seven minutes at 30kHz, followed by a 20-minute break, repeated three times. Automatic stop at the end of the session.

SA2 : A zapper using a sweep using 64 different frequencies, between 2426Hz and 2426Hz.
The Maestro-Zapper designed an automatic session copied from the original 30KHz sequence. 4 times more zapping (28min instead of 7min), and for only twice as much time (2h) Ideal when 7-20 is not enough.

SA3 : Based on our past experience, we are happy to add “for free”, on this version, a very special sequence, using the whispering of Very Low Frequencies (VLF) to the brain, to help you fall asleep more easily.

Cxx : continuous zapping for 3 hours, allowing a simple and fast zapping, and a wide range of experiences, with 6 frequencies easily selectable and/or modifiable, on the fly, at your fingertips. These frequencies include :

• CA1: The classic 30 kHz, Dr. Clark’s favourite frequency.
• CA2: Frequencies between 8kHz and 16kHz (one octave), leaving 255 different frequencies. We don’t target one particular parasite: We want them all!
• CA3: The classic 2.5kHz, leaving 64 different frequencies. The 2.5kHz at its best!
• Automatic shutdown at the end of the session (1h). The Maestro-Zapper has designed an automatic session copied from the original 30KHz sequence. 4 times more zapping (28min instead of 7min), for only twice as much time Ideal when the 7-20 zapping session is not enough.

Available functions :

• Beeper
• Constant output current indicator (output well connected)
• Battery voltage indicator, at the beginning of the session
• Simple and direct selection of six frequencies
• Choice of three sequences (7-20 min; 28-20 min; Non stop 3h)
• SELECTION OF 4 OUTPUT CURRENTS: 1.5 mA == 3.0 mA == 5.0 mA == 7.0 mA

This zapper can be used for :

• general and continuous zapping (3 hours maxi
• Frequency effect zapping (2.5kHz, 1kHz, 15Hz, 7.83 Hz)
• Zapping on plate (8.9V minimum and 30kHz)
• Homeography (9V minimum and 30kHz)
• Zapper (1.0kHz)

Important : External accessories for plate zapping, homeography or zapper are not provided.

L’article Maestro zapper mz6 est apparu en premier sur Zapper Hulda Clark.